Description
Description
Fits
| Year | Make | Model |
| 1989-2018 | Dodge Ram HD | 5.9L/6.7L Cummins |
These Stage 3 camshafts from Colt Cams will give you a longer duration & lift on the exhaust side for motors with a slight restriction, or if you want more exhaust flow and give you the strongest mid-range torque & HP, while still delivering good bottom-end power.
| Duration @ .050 | Cam Lift | Valve Lift | Lope Sep. | |
| Intake | 181 degrees | .280 | .490 | 106 |
| Exhaust | 210 degrees | .307 | .537 |
Part Number: C.343.S
Features
- Average 2 – 3 MPG increase
- 30 – 35 % smoke decrease
- Approximately 200° EGT drop
- Good to 4000 RPM
- Thicker core and fillet radiuses in front of both journals on #1 cyl – This strengthens cam for less chance of breakage
- Colt Cams heat treats them in a very unique way again for less chance of breakage and lobe scuffing
- All the cams are parkerized. This is for the initial start-up, break in procedure. Parco lubrite is a graphite coating done in a hot acid bath. This allows your cam lube something to hang on to and puts a barrier between your tappets and lobe so no hot spots can occur from metal on metal. This is another important detail for longevity.
Notes
- Colt Cams Tappet Set is highly recommended
- If you are revving over 3000 RPM a set of valve springs is STRONGLY recommended
- Retainer torque 44 ft lbs – use red loctite.
- Due to many contributing variances in an engine: heads planed, block decked, valve recession etc… any cam including stock, should always be checked for clearance before start up!
Explore more from our collection.
Reviews
There are no reviews yet.